cctv fiber optic video transceivers/transmitters CV1-1VT/1VR

transmitters 1) 1 Channel Video signal, Single-mode 40km signal transmission, Multi-mode 5km; 2) F/O connector: FC

transmitters

Fiber optic video transceivers

Comark fiber-optic video transceivers can simultaneously transmit 1-64 channels of

8-bit digitally encoded video / return or bidirectional data / unidirectional or bidirectional audio / Ethernet /

Telephone / Dry contact over one multimode or single-mode optical fiber. These multiplexers are typically

Used in applications where the cameras have P/T/Z capabilities. Plug and Play design ensures the ease of

Installation and operation. Electronic and optical adjustments are never required. LED indicators are

provided for instantly monitoring system status. Devices are available for either standalone or rack-mount

installation, which is suitable for different working environment.

Product characteristics8-bit digitally encoded and non-compression video transmission

directly compatible with NTSC, PAL, and SECAM CCTV camera systems and support RS-232,

RS-422, and RS-485 data protocols

Support any high-resolution video signal

Automatic compatible PAL, NTSC and SECAM video system

Power supply and other parameter state indication, which can monitor the operation condition of

System

Support no-damage regenerative trunk of video

Constant input optical power, and large dynamic range, no Electrical or Optical Adjustments

Required.

Special ASIC design.

Industry-grade of operating temperature from -10°C to 75°C, which is applied to the different

working environment

Hot-swap function

Stand-alone type or card-type installed in 19’’ 2U or 4U rack-mount chassis. Special ASIC design.

 

Comark fiber optic video transceivers MODEL: Part No. CV1-1VT/1VR series

Technical Specification

Video channels 1 channel

Video bandwidth 5-7.5 MHz

Automatic

Compatible video

System

PAL, NTSC, SECAM

Video input /

Output impedance

75 Ω

Video

Signal-to-noise

Ratio

≥67dB

Differential gain

(10%-90%APL) DG <1%

(Typical value)

Differential phase (10%-90%APL) DP <0.7°

(Typical value)

Video connector BNC

Fiber-optic

Specification

F/O connector: FC/ST/SC

Transmitter TX Power:-15 ~ -8dBm Sensitivity:-35dBm

Receiver: TX Power:-15 ~ -8dBm Sensitivity: -35dBm

Transmission Distance: 20KM (single mode)

Operating Wavelength: TX1310/RX1550nm (Transmitter); TX1550/RX1310nm

(Receiver)

Specification of custom-made options

Data Connector: Terminal Blocks

Encoded type: RS485 / RS422 / RS232 / Manchester

Data rate: 0 -400Kbps

BER: ≤10-9

Audio Connector: Terminal Blocks

Audio input / output impedance: 600Ω (Balance/ unbalance)

Audio input / output voltage: 2Vp-p (typical value)

Audio input / output level: 0dBm (typical value)

Video bandwidth: 10HZ~12KHZ

Audio digital encoded bandwidth: 24bit

Audio signal-to-noise ratio: S/N≥95dB (weighted)

Telephone Connector: RJ11

Bandwidth: 8 KHz

Features Support call-showing function;

Support H-F Operating mode: Point to point hotline mode / FXS-FXO

Ethernet

Connector: RJ45

Support mode: Half duplex or Full duplex

Standards IEEE802.3

Data rate: 10M / 100Mbps

Bandwidth: 25M

Dimensions: 19.2(L) 17.3(W) 2.8(H) cm

Operating Voltage: DC5V (we will offer external power supply from AC96-240V to DC5V for each unit)

Operating Temperature: -10°C to +75°C

Storing Temperature: -55°C to +85°C

Humidity: 0 to 95% non-condensing

MTBF: ≥ 105 hours

Warranty: 3 years

Application Intelligent Transportation System

Connection of Sub-network for Surveillance Center

Public Security Surveillance

High Way & Toll Station Surveillance

Industrial Closed Circuit Television Surveillance

cctv fiber optic video transceivers/transmitters CV1-1VT/1VR