rs232 TTL to fiber optic converters Cj-df11-s

rs232 1~2chs RS232/485/422 multiplex up to10chs optional one fiber port DIN35,DC24V power supply input.

rs232

Cj-df11-s

Description: Cj-df series products are a type of multi-channel analog signal, the digital signal, serial ports RS232/485/422 fiber conversion multiplexing equipment. It adopts the latest ARM chip, which is quite stable, reliable low power, supports 1 ~ 4 channels the digital TTL signal/contact closure signal, 1 ~ 4 channel analog (voltage/current), 1 ~ 2 channel RS232/485 or a channel RS422 signal in the fiber alone or multiplexing transmission. It requires no change of the user communication protocol solves the problem of electromagnetic interference, ground ring interference thunder destroys, which greatly improve the signal reliability, safety confidentiality, at the same time solve the problem of traditional mode of short distant transmission. Protection grade is IP30, strengthen cabinet, 35mmDIN guide installation, industrial stard DC24V power supply, possess the protection function of power polarity reverse connect.

Performance index: Contact closure signal/TTL digital signal interface: Ø Independent 1 ~ 4 channel input, 1~4 channel outputØ Input mode can be elected by TTL input or dry contacts inputØ TTL input level: input level + (0 ~ 1) V/logic "0", input level + (5 ~ 30) V/logic "1"Ø Dry contacts input: short circuit or openØ Output modes: the optional for 5V TTL / 24V TTL output, or relay outputØ Relay output form: FORM C(SPDT):Relay-operating time   6ms Relay release time   3ms Total switch time     10msRelay contacts capacity 1A/24VDC Ø Transmission delay time: 2 milliseconds Ø The maximum working switch frequency: 50Hz

 Fiber optic interface:Ø Fiber optic wavelength:multimode850nm,1310 nm; single mode1310 nm,1550nmØ Transmission fiber optic: multimode 50/125 um,62.5/125 um,100/140um;single mode8.3/125 um,9/125um,10/125um Ø Transmission range: multimode 2Km, single mode 20Km. Optional in far distanceØ Fiber interface type: ST, SC, FC optional, with standard ST light interfacePower and protection:Ø Power: industrial standard24V(+/-5%)power supply, Possess the power meter protector against fraud function, 5-pin Pluggable Screw Terminal

 Mechanical feature:Ø Overall dimension:146mm×135mm×53mm (H*W*D)Ø Shell:IP30 Grade of ProtectionØ Installation Method: 35mmDIN rail installationØ Net weight:800g

Working environment:Ø Operating temperature: -10-70°C(-40~+85°C optional)Ø Relative humidity: ≤90%(no condensation)  Ø Storage temperature: -40~80°C

 Order information:

Model	Specifications and introduce	unit
Cj-kf11	1 ch CC signal fiber optic converters, dry contact closure input SPDT Form C relay output, MM/SM ,0~15Km,ST/SC/FC (optional).	Pair
Cj-kf21	2 chs CC signal fiber optic converters, dry contact closure input SPDT Form C relay output, MM/SM ,0~15Km,ST/SC/FC (optional).	Pair
Cj-df11	1 ch digital signal fiber optic converters, active input triode output, MM/SM ,0~15Km,ST/SC/FC (optional)	Pair
Cj-df21	2 chs digital signal fiber optic converters, active input triode output, MM/SM ,0~15Km,ST/SC/FC(opt)	Pair
Cj-af11	1ch analog signal fiber optic converters, 4-20mA, MM/SM, 0~15Km, ST/SC/FC (optional).	Pair
Cj-af21	2chs analog signal fiber optic converters, 4-20mA, MM/SM, 0~15Km, ST/SC/FC (optional).	Pair
Cj-vf11	1ch analog signal fiber optic converters, 0-5/10VDC, MM/SM, 0~15Km, ST/SC/FC (optional).	Pair
Cj-vf21	2chs analog signal fiber optic converters, 0-5/10VDC, MM/SM, 0~15Km, ST/SC/FC (optional).	Pair
Cj-sf21	2 chs serial signal fiber optic converters, 2*RS232/2*RS485/1*RS422 9.6K~115.2k (optional) fixed rate, MM/SM, 0~15Km, ST/SC/FC (optional).	Pair
Cj-mf	Analog signal digital signal fiber multiplexer, 1 ~ 4 chs analog signal, 1 ~ 4 chs digital signal, 1 ~ 2 chs RS232/485 multiplexing, MM/SM, 0~15Km, ST/SC/FC (optional).	Pair

rs232 TTL to fiber optic converters Cj-df11-s